JETWAY NC97 Technical Manual page 25

Auto: enables LBA Mode if the devices support it and the device is not already
formatted with LBA Mode disabled.
Block (Multi-Sector Transfer): The optional settings are: Disabled and Auto.
Disabled: The Data transfer from and to the device occurs one sector at a time.
Auto: The Data transfer from and to the device occurs multiple sectors at a time if the
device supports it.
PIO Mode: the optional settings are: Auto, 0, 1, 2, 3 and 4. Use the item to select PIO
mode
DMA MODE: the optional settings are Auto, SWDMAn, MWDMAn , UDMAn.
S.M.A.R.T.: This option allows you to enable the HDD S.M.A.R.T Capability
(Self-Monitoring, Analysis and Reporting Technology). The optional settings are Auto;
Disabled; and Eabled.
32 Bit Data Transfer: the optional settings are: Disabled; Enabled.
Enable/disable 32-bit data transfer.
System Memory
This item will show information about the memory modules(s) installed.
20