Change A Port Triggering Rule - NETGEAR Nighthawk X4S D7800 User Manual

Nighthawk X4S AC2600 WiFi VDSL/ADSL Modem Router Model D7800
Field
Connection Type
Starting Port
Ending Port
8. Click the Apply button.
Your settings are saved and the rule is added to the Port Triggering Portmap Table on the Port Forwarding /
Port Triggering page.

Change a Port Triggering Rule

You can change an existing port triggering rule.
To change a port triggering rule:
1. Launch a web browser from a computer or WiFi device that is connected to the network.
2. Enter http://www.routerlogin.net.
A login window opens.
3. Enter the modem router user name and password.
The user name is admin. The default password is password. The user name and password are case-sensitive.
The BASIC Home page displays.
4. Select ADVANCED > Advanced Setup > Port Forwarding / Port Triggering.
The Port Forwarding / Port Triggering page displays.
Description
Select the protocol (TCP or UDP) that is associated with the inbound connection.
If you are unsure, select TCP/UDP.
Enter the start port number for the inbound connection.
Enter the end port number for the inbound connection.
Manage Port Forwarding and Port Triggering
276