NETGEAR Nighthawk X4S D7800 User Manual page 48

Nighthawk X4S AC2600 WiFi VDSL/ADSL Modem Router Model D7800
a. Fully insert the DSL or Ethernet cable in the correct port on the modem and in the correct port on the
modem router.
If you use a DSL cable, it must be connected to the gray DSL port. If you use an Ethernet cable, it must
be connected to the red Internet port.
b. Select the I corrected a problem with the DSL/Ethernet cable radio button.
c. Click the Next button.
• If you do not need to power cycle the modem or the DSL or Ethernet cable is already fully inserted in the
correct ports, do the following:
a. Select the None of the above radio button.
b. Click the Next button.
11. (Only if the following page displays) Specify how to manage problems with the detection of the IP address for
the Internet connection.
The page that might display states that a problem occurred while the wizard was detecting the Internet connection
IP address. If this page does not display, continue with Step 12.
Take one of the following actions:
• If your ISP assigned you a fixed (static) IP address, do the following:
Manage the Internet Settings Manually
48