NETGEAR Nighthawk X4S D7800 User Manual page 53

Nighthawk X4S AC2600 WiFi VDSL/ADSL Modem Router Model D7800
Field
Multiplexing Method
VPI
VCI
Use VLANID
Priority (0 ~ 7)
Bridge Mode
(IPTV interface only)
Account Name
Domain Name
Internet IP Address
Get Dynamically from ISP
Description
Select LLC-BASED or VC-BASED, as indicated by your ISP.
The multiplexing method can either be virtual circuit (VC) based or logical link control
(LLC) based.
Enter a number between 0 and 255 for the virtual circuit number for the virtual path
identifier (VPI), as indicated by your ISP.
If your ISP did not provide you with a VPI setting, leave the default setting (8). The
VPI might be required not only for a VC-based connection but also for an LLC-based
connection.
Enter a number between 32 and 65535 for the virtual circuit number for the virtual
channel identifier (VCI), as indicated by your ISP.
If your ISP did not provide you with a VCI setting, leave the default setting (35). The
VCI might be required not only for a VC-based connection but also for an LLC-based
connection.
Select the Use VLANID check box and enter the VLAN ID, as indicated by your
ISP.
A VLAN ID might be required if you subscribe to both Internet service and a service
such as IPTV. If your ISP did not provide you with a VLAN ID, leave the Use VLANID
check box cleared, which is the default setting.
If your ISP provided you with a VLAN ID and a priority value, enter the priority value,
which is a number from 0 to 7.
You can enter a priority value only in combination with a VLAN ID. If your ISP did
not provide you with a priority value, leave the default setting (0).
If you are specifying the settings for the virtual IPTV interface and your ISP informed
you that you must use bridge mode, select the Bridge Mode check box. For more
information about bridge mode, see
192.
Enter the account name, as indicated by your ISP. This name might also be called
the host name.
If your ISP did not provide you with an account name or host name, leave the default
setting.
Enter the domain name, as indicated by your ISP.
If your ISP did not provide you with a domain name, leave this field blank.
Your ISP uses DHCP to assign your IP address. Your ISP automatically assigns
these addresses.
Manage the Internet Settings Manually
53
Enable Bridge Mode for IPTV Devices on page