Table of Contents
Advertisement
Nighthawk X4S AC2600 WiFi VDSL/ADSL Modem Router Model D7800
•
Manually Set Up an ADSL Internet Connection
•
Manually Set Up a VDSL Internet Connection
•
Manually Set Up a Cable or Fiber Internet Connection
•
If your ISP allows only one Ethernet MAC address to connect to Internet and checks for your computer's MAC
address, inform your ISP that you bought a new network device and ask them to use the modem router's MAC
address.
•
Configure your modem router to clone your computer's MAC address. For more information, see one of the
following sections:
•
Manually Set Up an ADSL Internet Connection
•
Manually Set Up a VDSL Internet Connection
•
Manually Set Up a Cable or Fiber Internet Connection
Verify the PPPoE, PPPoA, PPTP, or L2TP Connection
If you use a PPPoE, PPPoA, PPTP, or L2TP connection to your ISP, make sure that the connection works.
To verify that your PPPoE, PPPoA, PPTP, or L2TP connection is working:
1.
Launch a web browser from a computer or WiFi device that is connected to the network.
2.
Enter http://www.routerlogin.net.
A login window opens.
3.
Enter the modem router user name and password.
The user name is admin. The default password is password. The user name and password are case-sensitive.
The BASIC Home page displays.
4.
Select ADVANCED > ADVANCED Home.
The ADVANCED Home page displays.
5.
In the Internet Port pane, check to see that the IP Address field shows a valid IP address and that the Connection
field shows the protocol that your connection is using (PPPoE, PPPoA, PPTP, or L2TP).
6.
In the Internet Port pane, click the Connection Status button.
The Connection Status page displays.
7.
Check the following:
•
The Connection Status field shows Connected.
on page 50
on page 59
on page 68
on page 50
on page 59
on page 68
Troubleshooting
289
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
