Table of Contents
Advertisement
Nighthawk X4S AC2600 WiFi VDSL/ADSL Modem Router Model D7800
If the NETGEAR website does not display within one minute, see
286.
Manually Set Up a Cable or Fiber Internet Connection
You can view or change the modem router's cable or fiber Internet connection settings manually. The following
sections describe the options that are available to you to manually set up the cable or fiber Internet connection:
•
Specify a Cable or Fiber Connection Without a Login
•
Specify a Cable or Fiber Connection With a Login and PPPoE Service
•
Specify a Cable or Fiber Connection With a Login and PPTP or L2TP Service
Note
Some ISPs require that you register on their website before you can obtain Internet service.
Follow the directions that your ISP gave you.
Specify a Cable or Fiber Connection Without a Login
If you want to manually configure the cable or fiber connection settings, use the information that your ISP gave you
to connect to your Internet service. If you cannot find this information, contact your ISP. Entering incorrect information
might prevent the modem router from connecting to the Internet.
To view or specify the settings for a cable or fiber Internet connection that does not require a login:
1.
Launch a web browser from a computer or WiFi device that is connected to the network.
2.
Enter http://www.routerlogin.net.
A login window opens.
3.
Enter the modem router user name and password.
The user name is admin. The default password is password. The user name and password are case-sensitive.
The BASIC Home page displays.
4.
Select ADVANCED > Setup > WAN Setup.
The WAN Setup page displays.
5.
From the WAN Preference menu, select Must use Ethernet WAN.
By default, the menu selection is Must use DSL WAN.
6.
Click the Apply button.
Your settings are saved and the modem router restarts.
Manage the Internet Settings Manually
68
Troubleshoot the Internet Connection
on page 68
on page 72
on page
on page 77
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
