Firebrick Replacement - Quadra-Fire 21M-ACC Owner's Manual

2100 Millennium Wood Stove (ACC)
D. Firebrick Replacement
Replace the fi rebrick if they become crumbly and/or if
there is a 1/4 inch (6.35mm) gap between the bricks.
Inspect the fi rebrick after each ash removal.
The fi rebox is lined with high quality fi rebrick, which has
exceptional insulating properties. There is no need to
use a grate; simply build a fi re on the fi rebox fl oor. Do
not operate appliance without fi rebrick.
1. After the coals have completely cooled, remove all
old brick and ash from unit and vacuum fi rebox.
2. Remove new brick set from box and lay out to
diagram shown.
3. Lay bottom bricks in unit.
4. Install rear bricks on the top of the bottom bricks.
Slide top of bricks under clip on back of fi rebox wall
and push bottom of brick back.
5. Install side bricks. Slide top of brick under clips
on side of fi rebox and push the bottom of the brick
until it is fl ush with the side of the unit.
Use Part 832-0550 when ordering individual brick. Provide brick
dimension or copy this page, mark the desired brick and take it
to your authorized dealer.
Page 30
1
1
1
2
5
8-1/2 inches (216mm)
8-1/2 inches (216mm)
Figure 30.1
No.
1 9 x 4-1/2 x 1-1/4
2 5-3/4 x 4-1/2
3 8 x 4-1/2 x 1-1/4
4 Brick with angle (see drawing)
5 Brick with angle (see drawing)
7039-131M
3
3
1 1
1
2
2
1-3/8 in.
(35mm)
4
1-3/4 in.
(44mm)
6-1/4 inches
(159mm)
7 inches (178mm)
5
Brick Size
October 13, 2015
1
1
1
4
3 inches
(76mm)
Qty
9
3
2
1
1