Sony STR-DA5300ES Operating Instructions Manual page 95

2
Press MENU repeatedly to
display the GUI menu on the TV
screen.
3
Press
.,+
repeatedly to select
"Music," then press
c±>
or
+.
"OM PORT" appears beside "Music."
4
Press
c±>
or
+.
The component connected to the
DIGITAL MEDIA PORT adapter is
re<.:ognized and "OM PORT" on the screen
will change to each component's name.
The category of the component connected
to DIGITAL MEDIA PORT adapter
appears on the screen.
Selecting an operation screen
to operate the component
connected to the DIGITAL MEDIA
PORT adapter
You can select an operation screen using the
GUlmenu, depending on the DIGITAL
MEDIA PORT adapter you want to use. For
some adapter, such as TDM-BT I or TDM-
NW I, the operation screen is tixed and you
cannot change it on the GUI screen.
{*-HI--
5
2
1
Make sure that the AMP button
is lit.
If it is not lit, or "GUI MODE" is not
displayed in the display window of the
receiver, follow the steps given in "7:
Operating the receiver using the GUI
(Graphical User Interface)" (page 41 ).
Note
An icon which shows the component
recognized is displayed on the TV screen. If
the adapter connected cannot be recognized.
"DMPORT" is displayed on the TV scrccn.
5
Press OPTIONS to display
"Function List."
6
Press
.,+
to select "DMPORT
Control."
You can select the following modes in this
menu;
• System GUI
This mode is for the TDM-iP I and
TDM-NCt. The list of tracks will be
displayed on the GUI screen of the
receiver. You can select a track you want
and play back it on each GUI screen.
• Adapter GUI
This mode is for the TDM-iPI and
TDM-NC I. The menu of the adapter
will be displayed on the TV screen.
• iPod
This mode can he selected only when
the TDM-iPI is connected.
If "DMPORT Control" is not displayed,
see the operating instructions supplied
with component for details on operating
that component.
..
o
-
: ::T
CD
...
o
"lJ
CD
m
-
c r
:::J
III
continued----_
95
GB