Sony STR-DA5300ES Operating Instructions Manual page 92

Hide thumbs Also See for STR-DA5300ES:
Table of Contents

Advertisement

XM Radio message list
Message
appears
Check Antenna
Updating
No Signal
Loading
Off Air
(space)----
CH---
Explanation
The XM antenna is not connected or
transmission is not being received
properly.
The encryption code is being updated.
The signal is too weak.
The audio channel or information is
being acquired.
The selected channel is off the air.
There is no characteristic information
such as an artist name, song title or
program title available.
The selected channel is not available.
Remedies
Make sure that the antenna is securely connected.
Try to disconnect the antenna, then reconnect it, or
turn off the power. then it turn back on.
Wait until the encryption code has been updated.
Adjust the antenna so that the signal is as strong as
possible.
Wait until the audio channel or information has
been acquired.
Make sure that you selected the channel properly.
Try to select another channel.
SIRIUS Satellite Radio message list
Message
appears
Explanation
Remedies
Antenna Error
The antenna is not connected properly. Check the connection between the SiriusConnect
Home tuner and the antenna.
Acquiring Signal The receiving condition is not good.
Try moving the antenna to another location. For
details about the antenna location, see the
instructions supplied with the SiriusConnect
Home tuner.
Call 888-.'\39-
SIRI
Check Sirius
Tuner
Invalid Channel
Locked
Channel
Subscription
Updated
Updating
Channels
• • %
Completed
( • • are for
integers)
92
GB
You have not subscribed for the selected
channel.
The SiriusConnect Home tuner is not
connected properly.
You have entered an invalid channel
number.
The selected channel is locked.
The subscription information has been
updated.
Channel information is being updated.
Check all the connections, and then turn the
system on again. Also make sure if the AC adaptor
supplied with the SiriusConnect Home tuner is
connected to a wall socket.
The channel to be tuned-in is void due to the
change by the broadcast service, or the receiving
condition is not good.

Advertisement

Table of Contents
loading

Table of Contents