Sony STR-DA5300ES Operating Instructions Manual page 124

Operating the output to zone
2/
zone 3
2
Press ZONE 2 or ZONE 3.
The remote switches to zone 2 mode or
I.one 3 mode.
For details on the connections and settings of
zone 2/zone 3, see "Listening to the sound in
another zone (ZONE 2/Z0NE 3 operations)"
(page 1(8).
The following operations are described for
connecting an IR repeater and operating the
receiver in zone 2 or zone 3. When an IR
repeater is not connected, use this receiver in
the main zone.
1
C)-rl[
-t-H-1
4
5
Turn on the main receiver (this
receiver).
3
Turn on the amplifier in zone 2
or zone 3.
4
Press INPUT SELECTOR on the
remote to select the source
signals you want to output.
For zone 2, analog video and audio
signals arc output. For the zone 3, only
analog audio signals are output. When
you select SOURCE, the signals or the
current input are output.
5
Adjust to a suitable volume.
• In the case of illustration
I-CD
or 2
(page
1(9),
you can only adjust the
surround back speaker volume in
zone 2.
1
Set "SUR BACK SP" to "NO" in the
Speaker settings menu.
2
Set "ZONE 2 SP" to "ON" in the
Speaker settings menu.
3
Adjust the volume using MASTER
VOL +/- on the remote.
• In the case of illustration I-®
(page
1(9),
adjust the volume using the
receiver of zone 2.
Tips
• Evcn whcn this rcceiver is standhy modc (press
I/()
on the remote to turned ofT th is recciver). the
receiver in zone 2 or zone 3 remains turned on. To
llIrn otT all receivers, press
I/()
and AV
I/()
on the
RM-AAL008 remote at the same time (SYSTEM
STANDBY).
• Only signals from components connected to the
analog input jacks are output through the ZONE 2
or ZONE 3 jacks. No signals are output from
components connected to only the digital input
jacks.
• When SOURCE is selected. the signals input to the
MULTI CHANNEL INPUT jacks are nOl output
from the ZONE 2 OUT or ZONE 3 OUT jacks
even when the multi-channel input is selected. The
analog audio signals of the currcnt function are
output.
124 GB