Sony STR-DA5300ES Operating Instructions Manual page 104

Name
@]
INPUT
[§]
AUTO
ffi]
HDMI
[l]
DMPORT
lID
COAX
lID
TrueHD
[1Q]
OPT
lDJ
ANALOG
~
DTS-HD
Function
Lights up constantly. One of
the input indicators also
lights up according to thc
currcnt input.
Lights up whcn INPUT
MODE is set to "AUTO:'
Lights up whcn the receiver
recognizes a component
connected via an HDMI IN
jack.
Lights up when DIGITAL
MEDIA PORT adapter is
connected.
Lights up when INPUT
MODE is sct to "AUTO"
and the source signal is a
digital signal being input
through the COAXIAL
jack.
Lights up when the receiver
is decoding Dolby TrueHD.
Lights up whcn INPUT
MODE is set to "AUTO"
and the source signal is a
digital signal being input
through the OPTICAL jack.
Lights up when INPUT
MODE is set to "AUTO"
and no digital signal is
being input through the
COAXIAL or OPTICAL
jacks, or when INPUT
MODE is set to
"ANALOG," or when the
"2ch Analog Direct" is
being used.
Lights up when the receiver
is decoding DTS-HD.
Name
11m
D.RANGE
!1§1
XM
I1Zl
EQ
11m
SIRIUS
INI
D.C.A.C.
1m
ZONE 2/
ZONE 3
~ SLEEP
~ L.F.E.
Function
Lights up when dynamic
range compression is
activated.
Lights up when XM Mini
Tuner and Home Dock are
connected and "XM" is
selected.
Lights up when the
equalizer is activated.
Lights up when the
SiriusConnect Home tuner
is connected and "SIRIUS"
is selected.
Lights up when auto
calibration is activated.
Lights up while operation in
zone 2/zone 3 is being
enabled.
Lights up when the sleep
timer is activated.
Lights up when the disc
being played back contains
an L.F.E. (Low Frequency
Effects) channel and the
L.F.E. channel signal is
actually being reproduced,
the bars underneath the
letters light up to indicate
the level. Since the L.F.E.
signal is not recorded in all
parts of the input signal the
bar indication will tluctuate
(and may turn off) during
playback.
[j]]
MULTI IN Lights up when multi-
channel input is sclected.
!Hl
MSTR Lights up when the receiver
is decoding DTS-HD
Master Audio.
104 GB