Sony STR-DA5300ES Service Manual

SERVICE MANUAL

Ver. 1.1 2007.10
This receiver incorporates Dolby* Digital and Pro Logic Surround and the DTS** Digital Surround System.
* Manufactured under license from Dolby Laboratories.
Dolby, Pro Logic, Surround EX, and the double-D symbol are trademarks of Dolby Laboratories.
** Manufactured under license from DTS, Inc.
"DTS", "DTS-ES" and "Neo:6" are registered trademarks of DTS, Inc. and "DTS-HD Master Audio",
"DTS-HD High Resolution Audio" and "DTS 96/24" are trademarks of DTS, Inc.
AUDIO POWER
SPECIFICATIONS (US model)
POWER OUTPUT AND TOTAL
HARMONIC DISTORTION:
With 8 ohm loads, both channels driven, from
20 − 20,000 Hz; rated 120 watts per channel
minimum RMS power, with no more than
0.09% total harmonic distortion from 250
milliwatts to rated output.
Amplifier section
POWER OUTPUT
(US and Canadian models)
Rated Power Output at Stereo Mode
(8 ohms 20 Hz − 20 kHz,
THD 0.09%):
120 W + 120 W
Reference Power Output at Stereo Mode
(4 ohms 20 Hz − 20 kHz,
THD 0.15%):
120 W + 120 W
Reference Power Output
(8 ohms 1 kHz, THD 0.7%)
2)
FRONT :
130 W + 130 W
2)
CENTER : 130 W
SURROUND
130 W + 130 W
SURROUND BACK
130 W + 130 W
Sony Corporation
9-887-741-02
Home Audio Division
2007J05-1
Published by Sony Techno Create Corporation
© 2007.10
STR-DA5300ES
SPECIFICATIONS
Reference Power Output
1)
Depending on the sound field settings and the
source, there may be no sound output.
2)
Measured under the following conditions:
Power requirements: 120 V AC, 60 Hz
1) 2)
(AEP, Russian, Ukrainian and UK models)
Rated Power Output at Stereo Mode
Reference Power Output at Stereo Mode
2)
:
2)
:
Reference Power Output
(4 ohms 1 kHz, THD 0.7%)
2)
FRONT :
120 W + 120 W
2)
CENTER : 120 W
2)
SURROUND :
120 W + 120 W
2)
SURROUND BACK :
120 W + 120 W
Reference Power Output
1) 2)
(8 ohms 1 kHz, THD
0.7%):
125 W + 125 W
Reference Power Output at Stereo Mode
(4 ohms 1 kHz, THD
0.7%):
125 W + 125 W
MULTI CHANNEL AV RECEIVER
US Model
Canadian Model
AEP Model
UK Model
(8 ohms 20 Hz − 20 kHz,
THD 0.09%)
2)
FRONT :
120 W + 120 W
2)
CENTER : 120 W
2)
SURROUND :
120 W + 120 W
2)
SURROUND BACK
120 W + 120 W
(4 ohms 20 Hz − 20 kHz,
THD 0.15%)
2)
FRONT :
120 W + 120 W
2)
CENTER : 120 W
2)
SURROUND :
120 W + 120 W
2)
SURROUND BACK
120 W + 120 W
(8 ohms 1 kHz, THD
10%):
150 W + 150 W
– Continued on next page –
:
: