Snmp Network Setting Function - Konica Minolta nizhub c250p User Manual

Administrator Operations
ministrator of the machine should perform the procedure for resetting the op-
eration prohibited state.
For the auth-password and priv-password, enter the password that meets
the requirements of the Password Rules. For details of the Password Rules,
see "Password Rules" on page 1-11.
To change the setting, specify the corresponding object ID. See the table be-
low for the setting items.
Setting Item
Write User Name
Security Level
auth-password
priv-password
2.9.4

SNMP network setting function

The Administrator who has been authenticated through SNMP access au-
thentication from the PC is allowed to operate the Network setting function.
To change the setting, specify the corresponding object ID. See the table be-
low for the setting items.
Setting Item
IP address
setting
NetWare set-
ting
AppleTalk Printer Name Setting
NetBIOS setting
C250P
IP Address
BOOT Protocol use setting
BOOT Protocol Type
Print Server Name
Printer Name
Object ID
1.3.6.1.4.1.18334.1.1.2.1.5.6.4.2.1.2.2
1.3.6.1.4.1.18334.1.1.2.1.5.6.4.2.1.3.2
1.3.6.1.4.1.18334.1.1.2.1.5.6.4.2.1.4.2
1.3.6.1.4.1.18334.1.1.2.1.5.6.4.2.1.5.2
Object ID
1.3.6.1.4.1.18334.1.1.2.1.5.7.1.1.1.3.1
1.3.6.1.4.1.18334.1.1.2.1.5.7.1.1.1.6.1
1.3.6.1.4.1.18334.1.1.2.1.5.7.1.1.1.7.1
1.3.6.1.4.1.18334.1.1.2.1.5.8.3.1.3.1.1
1.3.6.1.4.1.18334.1.1.2.1.5.8.5.1.3.1.1
1.3.6.1.4.1.18334.1.1.2.1.5.9.2.1.3.1.1
1.3.6.1.4.1.18334.1.1.2.1.5.10.1.1.4.1
2
2-59