Snmp Access Authentication Function; Snmp V3 Setting Function; Snmp Network Setting Function - Konica Minolta bizhub C3110 User Manual

2.11 SNMP Setting Function
2.11.2

SNMP access authentication function

If the settings of the Administrator mode are to be changed using SNMP from the PC, the user attempting to
gain access is authenticated to be the Administrator of the machine by using the Write User Name and SNMP
Password (auth-password, priv-password) of the SNMP v3 Write settings made in this machine.
Operation of the network setting function and the SNMP password change function of the security control
functions that can be used over the network using SNMP is granted to the Administrator who is identified by
a matching SNMP password for the Write User Name.
Reference
- If [auth-password] has been selected for Security Level, hashing is used for the authentication informa-
tion (auth-password) to be transmitted. The machine allows you to select either HMAC-MD5 or HMAC-
SHA1 for hashing.
- If [auth-password/priv-password] has been selected for Security Level, the authentication information
(auth-password/priv-password) and data (object ID that specifies the object to be changed, value to be
set, etc.) to be transmitted are used for hashing and encryption. The machine allows you to select either
CBC-DES or CBC-AES for encryption.
- For accessing the MIB, use the MIB browser corresponding to the above encryption algorithm.
2.11.3

SNMP v3 setting function

The Administrator who has been authenticated through SNMP access authentication from the PC is allowed
to operate the SNMP password change function.
For the auth-password and priv-password, enter the password that meets the requirements of the Password
Rules. For details of the Password Rules, see page 1-9.
To change the setting, specify the corresponding object ID. See the table below for the setting items.
Setting Item
Write User Name
auth-password
priv-password
Security Level
2.11.4

SNMP network setting function

The Administrator who has been authenticated through SNMP access authentication from the PC is allowed
to operate the network setting function. To change the setting, specify the corresponding object ID. See the
table below for the setting items.
Setting Item
IP address setting
DNS server address setting
Rendezvous (Bonjour) setting
NetBIOS setting
bizhub C3110
IP Address
BOOT Protocol use setting
BOOT Protocol Type
Object ID
1.3.6.1.4.1.18334.1.1.2.1.5.6.4.2.1.2.2
1.3.6.1.4.1.18334.1.1.2.1.5.6.4.2.1.3.2
1.3.6.1.4.1.18334.1.1.2.1.5.6.4.2.1.4.2
1.3.6.1.4.1.18334.1.1.2.1.5.6.4.2.1.5.2
Object ID
1.3.6.1.4.1.18334.1.1.2.1.5.7.1.1.1.3.1
1.3.6.1.4.1.18334.1.1.2.1.5.7.1.1.1.6.1
1.3.6.1.4.1.18334.1.1.2.1.5.7.1.1.1.7.1
1.3.6.1.4.1.18334.1.1.2.1.5.7.1.2.1.3.1.1
1.3.6.1.4.1.18334.1.1.2.1.5.9.2.1.3.1.1
1.3.6.1.4.1.18334.1.1.2.1.5.10.1.1.4.1
2
2-26