To use the cable holder of the AP-1 Assistant
Panel
When you are using the optional AP-1 Assistant
Panel, you can attach a cable holder to the AP-1
attachment hook base, and use the cable holder to
store the cable of the control panel.
AP-1 Assistant Panel (optional)
See "Attaching the AP-1 Assistant Panel (Optional)"
(page 39) for more information about attaching the
AP-1.
Attaching the AP-1
Assistant Panel
(Optional)
The optional AP-1 Assistant Panel provides the
same functions as the controls on the right-side
panel of the unit. You can attach the assistant
panel to the left side of the unit.
1
Remove the microphone holder
attachment screws, and use the screws
to attach the hook base.
2
Screw the cable holder into the hook
base.
See "To use the extension cable" (page 38) for
more information about how to use the cable
holder.
Cable holder
3
Hang the reverse side of the AP-1 on the
hook base.
Attaching the AP-1 Assistant Panel (Optional)
Hook base
39