Table of Contents
Advertisement
Zebra (default settings)
1 (70%)
Use the <ZEBRA> page of the Camera >USER
(OPERATION) menu to adjust zebra patterns and
turn them on and off.
<ZEBRA> page
Item
Function
a)
Turn the zebra pattern in the
VF
viewfinder on and off.
a)
Turn the zebra pattern on the
MONITOR
monitors connected to the HD SDI
MON1 or HD SDI MON2
connector on and off.
a)
Turn the zebra pattern on the
HD-Y
monitor on and off.
a)
Turn the zebra pattern on a device
VBS
connected via the REMOTE
connector on and off.
ZEBRA
Select the zebra type to be
TYPE
displayed: 1, 2, or 1&2
ZEBRA1
Adjust the level (0 to 109%) of the
LEVEL
zebra 1 indication (factory default:
70%).
WIDTH
Adjust the width (0 to 30%) of the
zebra 1 indication (factory default:
70%).
ZEBRA2 Adjust the level (50 to 109%) of
the zebra 2 indication (factory
default: 100%).
a) These items can also be set on the <CHAR/MARK
MIX> page.
Specifying and Displaying
Cursors
2 (100%)
You can display cursors on the viewfinder and
monitor screens.
Example: Box cursor
Activating/deactivating cursor display on
each output
The <CHAR/MARK MIX> page of the Camera
>USER (OPERATION) menu allows you to
activate and deactivate the display of cursors on
each output.
<CHAR/MARK MIX> page
The display of cursors (CURSOR) is set to OFF
for all outputs when the unit is shipped from the
factory.
Item
VF
HD-Y
MON
Selecting the type and size of the cursor
The <MARKER SETTING> page allows you to
select the type and size of the cursor.
The cursor will appear on an output if cursor
display for that output has been activated on the
<CHAR/MARK MIX> page.
Viewing Settings and Indications in the Viewfinder
Function
Turn the display of cursors on the
viewfinder on and off.
Turn the display of cursors on the
monitor on and off.
Turn the display of cursors on the
monitors connected to the HD SDI
MON1 or HD SDI MON2 connector
on and off.
69
Advertisement
Table of Contents
