Making Viewfinder Detail Adjustments; Displaying Zebra Patterns - Sony SRW-9000PL Operation Manual

Item Setting
HD-Y Turn the markers on or off on the
monitors connected to the HD SDI OUT
A/B connectors (when the HKSR-9001
is installed).
VBS Turn the markers on or off on the
monitors connected via the TEST OUT
and REMOTE connectors.
The CHAR/MARK LEVEL line allows you to
adjust the brightness (0 to 50) of the character and
marker indications.
Specifying the markers to be displayed
The <MARKER SETTING> page allows you to
select the markers that you want to display.
The selected markers will appear on an output if
marker display for that output has been activated
on the <CHAR/MARK MIX> page.
<MARKER SETTING> page
All the markers have been set to OFF at the
factory.
Item Setting
CENTER Set to ON to display the center
marker and select the type of the
center marker.
1: Entire cross
2: Entire cross with a hole
3: Center
4: Center with a hole
SAFETY Set to ON to display the safety
zone marker and specify the range
(80%, 90%, 92.5%, or 95%).
EFFECTIVE Set to ON to display the effective
pixel area.
ASPECT Set to ON to display the aspect
marker and specify the aspect:
2.40:1, 2.35:1, 1.85:1, 1.66:1,
16:9, 15:9, 14:9, 13:9, 4:3, VAR
H, VAR V
68 Viewing Settings and Indications in the Viewfinder
Item Setting
VARIABLE If you select VAR H or VAR V for
ASPECT, set the H or V value.
VAR H: 12 to 1920
VAR V: 12 to 1080
SAFETY Set to ON to display the safety
zone for the selected aspect
marker, and specify the range.
MASK Set to ON to make the areas
outside the selected aspect marker
dimmer, and select the mask level
(0 to 15).
Making Viewfinder Detail
Adjustments
You can adjust the image on the viewfinder
screen to obtain a clearer view, using the <VF/
HD-Y DETAIL> page of the Camera >USER
(OPERATION) menu. This adjustment does not
affect the image being recorded.
<VF/HD-Y DETAIL> page
Item Function
VF Turn the VF detail adjustment function
on or off.
HD-Y Turn the monitor picture detail
adjustment function on or off.
LEVEL Set the level (0 to 100%) of the VF
detail adjustment function (when VF is
ON).
CRISP Set the noise crispening level (–99 to
+99).

Displaying Zebra Patterns

You can display zebra patterns on the viewfinder
and monitor screens.