REMOVING THE TURNTABLE MOTOR
WARNING
Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before
operating.
Failure to do so can result in death or
electrical shock.
1.
Unplug microwave oven or disconnect
power.
2.
Open the microwave oven door, remove
the turntable platter, rollers, and spindle,
and close the door.
Turntable Spindle
Platter
3.
Screw (1 of 10)
4.
5.
Turntable Motor
Rollers
4-25
Remove the ten screws from the bottom
cover and lower the cover.
Bottom Cover Assembly
Disconnect the wire connector from the
turntable motor terminals.
Remove the two screws from the turntable
motor and remove the motor.
Screws
Turntable Motor
Connector