Whirlpool MH3184XPB Service Manual page 46

13. To remove the high-voltage capaci-
tor:
a) Discharge the high-voltage capacitor
by touching the leads of a 20,000 Ω re-
sistor from each of the capacitor leads
to chassis ground.
b) Remove the high-voltage diode from
the capacitor (see page 4-20 for the
procedure).
c) Disconnect the wire connectors from
the high-voltage capacitor terminals.
d) Loosen the bracket screw, slide the high-
voltage capacitor out of the bracket, and
remove the capacitor.
High-Voltage Capacitor
Bracket Screw
2 Red
High-Voltage
Capacitor Wires
14. To remove the magnetron:
a) Discharge the high voltage capacitor
b) Remove the mounting bracket and cav-
c) Remove the magnetron thermostat from
d) Disconnect the filament wire connec-
e) Remove the four screws from the mag-
1 White
4-23
by touching the leads of a 20,000 Ω re-
sistor from each of the capacitor leads
to the chassis ground.
ity thermostat #1 (see page 4-12 for the
procedure).
the magnetron (see page 4-18 for the
procedure).
tors from the magnetron terminals.
netron and remove the magnetron from
the oven.
4 Magnetron Screws
Filament Wires