Whirlpool MH3184XPB Service Manual page 29

b) Unhook and lift the locking arm on the
cavity thermostat and humidity sensor
holder from the slot in the oven.
c) Unhook the cavity thermostat and hu-
midity sensor holder from the left side
of the top cover, and move the holder
to the left.
Unhook Left Side of Top Cover
Humidity Sensor Holder
Holder Locking Arm and Slot
d) Remove the top screw from the control
panel. Open the oven door, lift the pan-
el, unhook the side latching tabs from
the slots, and tilt the panel forward.
Control Panel Screw
Cavity Thermostat and
e) Disconnect the 3-wire humidity sen-
sor cable (red, white and black) from
humidity sensor connector P1.
Humidity Sensor
Connector P1
f) Remove the humidity sensor cable from
the clips in the bottom of the top cover
and along the right front air guide.
Top Cover
Right Front Air Guide
4-6
Humidity Sensor
Cable and Clips