Whirlpool MH3184XPB Service Manual page 50

7. Starting at the top edge of the door near
the center and working clockwise, use a
putty knife, and pry the latching tabs of
the choke out of the door frame slots. Lift
the choke as you release the tabs so they
do not snap back into the slots. NOTE:
When you reach the handle side of door,
pull both the choke and the choke cover
away from the door frame, and then sep-
arate the two components.
Pry Out
Putty Knife
Tab
8. To remove the door switch actuators from
the choke, remove the screw from each
actuator.
Screw
Door Switch Actuators
DOOR COMPONENTS
Choke With Switch Actuators
Door Frame With Outer
Glass (Plastic) and Handle
REASSEMBLY NOTE: When you reinstall
the door on the oven, insert the top pin into
the pivot bracket and press down on the pin
until it snaps into place.
4-27
Choke
Choke Cover
Screw