Hypertext Transfer Protocol (Http) Commands; Crypto Key Generate Rsa; Crypto Key Generate Dsa - NETGEAR M4100 Series ProSAFE Reference Manual

no crypto certificate generate
Use this command to delete the HTTPS certificate files from the device, regardless of
whether they are self-signed or downloaded from an outside source.
Format
no crypto certificate generate
Mode Global Config

crypto key generate rsa

Use this command to generate an RSA key pair for SSH. The new key files will overwrite any
existing generated or downloaded RSA key files.
Format
crypto key generate rsa
Mode Global Config
no crypto key generate rsa
Use this command to delete the RSA key files from the device.
Format
no crypto key generate rsa
Mode Global Config

crypto key generate dsa

Use this command to generate a DSA key pair for SSH. The new key files will overwrite any
existing generated or downloaded DSA key files.
Format
crypto key generate dsa
Mode Global Config
no crypto key generate dsa
Use this command to delete the DSA key files from the device.
Format
no crypto key generate dsa
Mode Global Config

Hypertext Transfer Protocol (HTTP) Commands

This section describes the commands you use to configure HTTP and secure HTTP access
to the switch. Access to the switch by using a Web browser is enabled by default. Everything
you can view and configure by using the CLI is also available by using the Web.
M4100 Series ProSAFE Managed Switches
Management Commands
460