Vlan Commands; Show Spanning-Tree Vlan; Vlan Database; Network Mgmt_Vlan - NETGEAR M4100 Series ProSAFE Reference Manual

show spanning-tree vlan

This command displays the association between a VLAN and a multiple spanning tree
instance. The <vlanid> corresponds to an existing VLAN ID.
Format
show spanning-tree vlan <vlanid>
Mode • Privileged EXEC
• User EXEC
Term Definition
VLAN Identifier The VLANs associated with the selected MST instance.
Associated Identifier for the associated multiple spanning tree instance or "CST" if associated with
Instance the Common and Internal Spanning Tree.

VLAN Commands

This section describes the commands you use to configure VLAN settings.

vlan database

This command gives you access to the VLAN Config mode, which allows you to configure
VLAN characteristics.
Format
vlan database
Mode Privileged EXEC

network mgmt_vlan

This command configures the Management VLAN ID.
Default 1
Format
network mgmt_vlan <1-4093>
Mode Privileged EXEC
no network mgmt_vlan
This command sets the Management VLAN ID to the default.
Format
no network mgmt_vlan
Mode Privileged EXEC
M4100 Series ProSAFE Managed Switches
Switching Commands
46