Dot1X Re-Authenticate; Dot1X Re-Authentication - NETGEAR M4100 Series ProSAFE Reference Manual

authenticator PAE sets the controlled port mode to reflect the outcome of the authentication
exchanges between the supplicant, authenticator, and the authentication server. If the
mac-based option is specified, MAC-based dot1x authentication is enabled on the port.
Default auto
Format
dot1x port-control all {force-unauthorized | force-authorized | auto
| mac-based}
Mode Global Config
no dot1x port-control all
This command sets the authentication mode on all ports to the default value.
Format
no dot1x port-control all
Mode Global Config

dot1x re-authenticate

This command begins the re-authentication sequence on the specified port. This command is
only valid if the control mode for the specified port is "auto" or "mac-based". If the control
mode is not "auto" or "mac-based", an error will be returned.
Format
dot1x re-authenticate <slot/port>
Mode Privileged EXEC

dot1x re-authentication

This command enables re-authentication of the supplicant for the specified port.
Default disabled
Format
dot1x re-authentication
Mode Interface Config
no dot1x re-authentication
This command disables re-authentication of the supplicant for the specified port.
Format
no dot1x re-authentication
Mode Interface Config
M4100 Series ProSAFE Managed Switches
Switching Commands
84