Road Sign; Map Orientation; Map Scale - Skoda Infotainment Columbus Operating Instructions Manual

›
Press in the Navigation main menu the function key  → Map → Select cat-
egories for POIs.
›
Select the desired POI category.
Guidance to the POI
›
Press the function key with the symbol of a POI in the map.
The following POI details are displayed.
If the function key includes several POIs, then they will be listed. Select the de-
sired destination from the list, then POI details will be shown.
›
Press the function key Start.
Then a route to the destination is calculated and the route guidance starts.
If the navigation menu for setting the alternative routes is turned on, the guid-
ance for this route type (economic / fast / short) must be selected before start-
ing.

Road sign

The device offers the possibility of displaying the traffic signs stored in the
navigation data or detected by the front camera in the device screen and the
instrument cluster display.
Turn on / off the display traffic signs
The traffic signs can be displayed in one of the following areas of the device
screen.
›
On the map.
›
In a extra window in menu » Fig. 39
E
The Dynamic Road Sign Display by the front camera and the showing on the
display of the instrument cluster can be turned off/on in the assistance sys-
tems » page 80.

Map Orientation

The map in the 3D display is aligned only with respect to the direction of travel.
The map in the 2D display can be oriented to the north or in relation to the di-
rection of travel.
68
Navigation
» page 76.
on page 60.
A change of map orientation is only possible when the map is centred on the
vehicle position (the function key  or
 is not shown).
Change the map orientation
›
Press in the Navigation main menu the function key  in the area
» Fig. 46 on page 66.
The map is oriented to the north or in relation to the direction of travel.
The arrow in symbol  always points to the north.
The map is oriented to the north
The map does not rotate, the vehicle position symbol  rotates.
Map oriented to the direction of travel
The map rotates, the vehicle position symbol  does not rotate.

Map scale

It is possible to change the map scale manually or to turn on the automatic
change of scale.
Symbols of the scale function keys
In the map area » Fig. 46 on page 66 the following context-dependent
D
function keys and information is displayed.
Manually set scale

Automatically adjusted scale

Turn on / off the automatic change of scale

Map view in reduced scale

Current elevation

Manual change of scale
Map scale can be change in the following ways.
›
Turn the
 control.
›
Touching the screen with two fingers and pulling them apart or closing them
together.
D
