Pairing And Connecting - Skoda Infotainment Columbus Operating Instructions Manual

Message
To use the Bluetooth function,
please switch the ignition on.
Please switch on Bluetooth.
Please search for and connect a mo-
bile telephone.
Telephone not available.
Telephone is currently not available.
Unknown
(Name of the telephone service pro-
vider)

Pairing and connecting


Introduction
This chapter contains information on the following subjects:
conditions for coupling
Telephone search
Pairing - no telephone connected
Pairing - a telephone is connected
Pairing - two telephones connected
Connected SIM card in an external module, no telephone connected
Connected SIM card in an external module, a telephone - coupling
Pairing from the telephone
Pairing confirmation
Administering coupled devices
The pairing procedure is dependent on the number of telephones already con-
nected, whether using the inserted SIM card in the external module or via the
telephone using the profile rSAP
To connect a telephone with the device, the two devices must be paired via
®
Bluetooth .
A connection with a telephone that is already paired does not require coupling.
It is enough to find the telephone that has been coupled in the list of coupled
telephones and make the connection.
42
Telephone
Meaning
Switch on the ignition.
®
Switch on the Bluetooth
the device.
Find telephone and connect to the
device.
A problem with the Bluetooth
the device, consult a specialist.
The telephone did not provide any in-
formation regarding the telephone
service provider.
» page 39, Possible connection types.
If a SIM card is located in the external module with activated telephone serv-
ices, then only one telephone can be connected with the device. Depending on
the telephone used only those telephone contact lists and text messages
(SMS) are available.
function on
Note
The range of the connection to the hands-free system is limited to the pas-
■
senger compartment.
The maximum number of paired telephones is 20. Pairing a new telephone
■
®
unit in
after reaching the maximum number causes the telephone that has not been
coupled for the longest time to be automatically replaced.
conditions for coupling
The telephone can be coupled with the device under the following conditions.
The ignition is switched on.

The Bluetooth

switched on.
The visibility of the device

The telephone is within range of the Bluetooth

The telephone is compatible with the device.

42
The pairing can be initiated from the device or from the telephone.
42
43
During the pairing and connecting process the device can demand the confir-
43
mation by the Bluetooth
43
messaging or the connection of an audio player or similar). The telephone dis-
play should be monitored to acknowledge any possible request.
44
44
Please refer to the compatibility of telephones as well as updates which are
44
available for the Bluetooth
44
Internet pages.
45
http://infotainment.skoda-auto.com
Telephone search
The telephone is not in the list of paired devices
The telephone can be searched for in one of the following ways.
›
If there is no connected telephone to the device, then press the button
→ Find telephone.
›
If there is no telephone connected to the device, then press the button
→  → Find telephone.
®
function of the device » page 17
» page 17 and the telephone is switched on.
®
profile (e.g., enable contact import, enable the test
®
device, and are available on the following ŠKODA
and the telephone is
®
signal of the device.


