Press The Function Key Start; Options For Map Display; Poi In The Map; Road Sign - Skoda Amundsen Operating Instructions Manual

Options for map display

›
Press in the Navigation main menu the function key  .
The following function keys are displayed
2D - Two-dimensional map display

3D - Three-dimensional map display

Map display with the route from the current vehicle location to the desti-

nation
Destination display in the map

Automatic map display in day or night mode (depending on the currently
A
active vehicle lighting)
Daytime map display
B
Night-time map display
C
On / off of the split screen display
D
On / off of the selected POI categories display
E
If the map scale of the 2D Map or 3D Map is greater than 10 km (5 miles), then
the map is automatically displayed as 2D and aligned in the direction of north.
If the scale is increased beyond this value, then the map is switched back to
the original representation.

POI in the map

The device offers the possibility of up to 10 POI categories to be display on the
map.
Switch display on/off
›
Press in the Navigation main menu the function key  → POIs.
Select the displayed category
›
Switch on show POIs.
Fig. 34
Map options
» Fig. 34.
›
Press in the Navigation main menu the function key  → Map → Select cat-
egories for POIs.
›
Select the desired POI category.
Guidance to the POI
›
Press the function key with the symbol of a POI in the map.
The following POI details are displayed.
If the function key includes several POIs, then they will be listed. Select the de-
sired destination from the list, then POI details will be shown.
›

Press the function key Start.

Then a route to the destination is calculated and the route guidance starts.
If the navigation menu for setting the alternative routes is turned on, the guid-
ance for this route type (economic / fast / short) must be selected before start-
ing.

Road sign

The device offers the possibility of displaying the traffic signs stored in the
navigation data or detected by the front camera in the device screen and the
instrument cluster display.
Turn on / off the display traffic signs
The traffic signs can be displayed in one of the following areas of the device
screen.
›
On the map
›
In a extra window in menu » Fig. 27
E
The Dynamic Road Sign Display by the front camera and the showing on the
display of the instrument cluster can be turned off/on in the assistance sys-
tems » page 60.

Map Orientation

The map in the 3D display is aligned only with respect to the direction of travel.
The map in the 2D display can be oriented to the north or in relation to the di-
rection of travel.
A change of map orientation is only possible when the map is centred on the
vehicle position (the function key  or  is not displayed).
» page 56.
on page 43.
Navigation (Amundsen)

49