Skoda Infotainment Columbus Operating Instructions Manual page 46

›
If a SIM card is inserted in the external module of the device, then press
» Fig. 24 on page 40 → Find telephone.
→ D
A search for available devices starts. After about 30 seconds a list of found de-
vices appears, which is updated up to 1 minute after the start of the search ap-
pears.
›
If you do not want to wait for the display of the list press the function key
Results.
›
Select the desired select telephone.
The telephone is in the list of coupled devices
If a telephone is connected with the device then proceed in one of the follow-
ing ways.
›
Press the key →

 → Select telephone and select the desired telephone.
or
›
Press the key →  → Bluetooth → Paired devices and select the tele-

®
phone and a Bluetooth - connection profile
›
If there is SIM card in the external module with activated telephone services,
then press the key » Fig. 24
→ D

telephone.
Pairing - no telephone connected
›
Press the key → Find telephone.

®
A search for available Bluetooth
›
Select the desired select telephone.
›
Confirm the coupling.
After pairing confirmation the telephone is connected to the device as the
main telephone.
Pairing - a telephone is connected
›
Press the key →  → Bluetooth → Find devices.

®
A search for available Bluetooth
›
Select the desired select telephone.
The following menu appears in the screen.
» page 45.
on page 40 and select the desired
devices takes place.
devices takes place.
■ Cancel - Cancel the coupling

Replace - Pairing and replacement of the main telephone
■
Add - Pairing as additional telephone (the menu is not visible when the tele-
■
phone is connected via the rSAP profile)
›
Select the desired connection type.
›
Confirm the coupling.
After pairing confirmation the telephone connects to the device.
Pair the telephone when the main telephone is connected via the rSAP
profile
To connect another telephone to the device, it is necessary to first quit the
connection using the rSAP profile.
›
Press the key →  → Bluetooth → Find devices.

›
Select the desired select telephone.
›
Press the function key Add → Hands-free telephone (HFP).
The main telephone ends the connection via the rSAP profile and connects to
the device via the HFP profile.
›
Confirm the coupling.
The telephone to be connected connects with the device as the additional tel-
ephone.
Pairing - two telephones connected
›
Press the key →  → Bluetooth → Find devices.

A search for available Bluetooth
›
Select the desired select telephone.
The following menu appears in the screen.
Cancel - Cancel the coupling
■
Main tel. - Changing the main telephone
■
Addition. tel. - Changing the auxiliary telephone
■
›
Select the desired connection type.
›
Confirm the coupling.
After pairing confirmation the telephone connects to the device.
Pair the telephone via the rSAP profile
›
Press the key →  → Bluetooth → Find devices.

›
Select the telephone you want with the rSAP profile.
®
devices takes place.
Telephone

43