Mirrorlink Mirrorlink - Skoda Infotainment Columbus Operating Instructions Manual

MirrorLink
™
MirrorLink

Introduction
This chapter contains information on the following subjects:
Connect/disconnect
Main menu
Managing the application
Settings
Function problems
™
The function MirrorLink offers the possibility to display and operate certified
applications of a connected device (such as a telephone) in the device screen.
For reasons of safety, the operation of some applications while driving is limi-
ted or not possible.
The list of available facilities and applications, which support the MirrorLink
function, can be seed in the ŠKODA Internet pages.
http://infotainment.skoda-auto.com
CAUTION
ŠKODA is not responsible for damage to the unit or to the vehicle by the use
■
of faulty or incorrectly programmed applications in the connected device.
Due to the low charging current from the USB input, intensive use of the
■
™
function MirrorLink can lead to the discharge of the battery of the connected
device.
Note
With some connected devices, it is necessary that the display is switched on
over the entire duration of the connection for trouble-free functioning of
™
MirrorLink .
Connect/disconnect

Read and observe on page 56 first.
Connection set-up
›
Turn on the ignition and switch on the device.
›
Connect the equipment to one of the USB inputs
56
MirrorLink
56
56
57
57
58
™
» Fig. 16 on page 28.
›
™
Press the key → Selection.
→ 

›
Select the desired device.
By connecting the device to the device the function of the connected device is
limited (e.g. no coupling of the telephone is possible). In this case, the device
has the message The mobile device is restricted.
The connected device cannot be used as a USB source for media playback or
viewing images.
Disconnection
›
In the main menu
 press the function key
.
or
›
Disconnect the device from the USB input.
Main menu

Read and observe on page 56 first.
After connecting the device to the device a list of certified applications and the
following menu is displayed » Fig.
If there is only one available application it will be started automatically after
connecting.
Disconnection

Display a list of running applications with the ability to terminate them

Displays the screen contents of the connected device (while an application

is running)
Fig. 36
MirrorLink: Main menu
36.
