›
Press in the Navigation main menu the function key → Manage memory
→ Delete user data → Entered cities.
If there are several places in the enter land with the same name, then they are
shown on a map after completion of the entry along with a list of the locations
found
» Fig.
40.
There is a maximum of 6 places shown in this list, each is identified with a let-
ter. Then these places are shown in the map with the icon and labelled with
a letter which corresponds with letter in the list.
If more than 6 places were found, then the list can be scrolled through by turn-
ing the knob or sliding the slider.
Enter POI
›
If no guidance takes place, then in the main menu Navigation, press the
function key → Options → POI.
›
If a route guidance does occur, then in the main menu Navigation press the
function key → New dest./stopover → Options → POI.
›
Enter and confirm the destination
›
Press the function key Start.
If the menu setting for the alternative routes is turned on, the guidance for
this route type (economic / fast / short) must be selected before starting.
If the destination entry occurs during route guidance, the destination change
must be confirmed by pressing the function key start in addition to confirming
in the following menu that appears.
Enter destination on the map
›
If no guidance takes place, then in the main menu Navigation, press the
function key → Options → On map.
» page
64.
Fig. 41
Enter destination on the map
›
If a route guidance does occur, then in the main menu Navigation press the
function key → New dest./stopover → Options → On map.
›
Move the destination onto the cross line position on the map.
›
Press the function key → Start.
If the menu setting for the alternative routes is turned on, the guidance for
this route type (economic / fast / short) must be selected before starting.
If the destination entry occurs during route guidance, the destination change
must be confirmed by pressing the function key start in addition to confirming
in the following menu that appears.
Map zoom in / out
Map display with full screen display
Map display with small screen display
Enter destination via GPS coordinates
Fig. 42 Enter destination through GPS coordinates
›
If no guidance takes place, then in the main menu Navigation, press the
function key → Options → On map.
›
If a route guidance does occur, then in the main menu Navigation press the
function key → New dest./stopover → Options → On map.
›
Press the desired function key to set the latitude and longitude value.
›
Set the desired value using the function keys /
.
›
Touch the screen outside of the function keys, the input of GPS coordinates
is ended.
›
Press the function key → Start.
If the menu setting for the alternative routes is turned on, the guidance for
this route type (economic / fast / short) must be selected before starting.
61
Navigation