Page 3
Introduction You have chosen a ŠKODA vehicle, which is fitted with an Amundsen navigation system (hereafter called the navigation system) - we thank you for your confidence in us. We recommend that you read these operating instructions carefully so that you can quickly become familiar with your radio navigation system.
General information General information Owner's Manual Warranty The equipment warranty terms and conditions also apply for new vehicles. This Owner's manual describes all possible equipment variants without identify- ing them as special equipment, model variants or market-dependent equipment. After the expiration of the warranty, a piece of equipment in need of repair can be replaced with a reconditioned, original item with spare part warranty.
Page 6
General information Anti-theft protection Special functions The anti-theft coding of your radio navigation system prevents an operation of Parking aid the system after a voltage interruption, e.g. during a vehicle repair or after theft. If your vehicle is equipped with a“parking aid” and after it is activated, the dis- After disconnecting the battery, disconnecting the radio navigation system from tance to the obstacle is shown in the display.
General information Equipment overview If the ignition is switched off, the system switches off automatically after approx. half an hour (vehicle battery protection against discharging). Ð - Button Setting the volume – for switching the equipment on and off (press) –...
General information Go to next menu level Input screen with keypad – Pressing the button takes you to the next menu level. Return to the previous menu level with the button Set value – Press the button opens up an additional screen in which it is possible to set the required value by turning the button , e.g.
Page 9
General information Selecting letters based on specific characters In the input screen, some characters are marked with the symbol “ ”. Pressing the character identified in this way for a long period of time allows you to choose spe- cial characters for the selected language.
Basic settings Basic settings System and sound settings ■ - Setting of the balance between the left and right side Balance ■ - Setting the balance between the front and the rear; Fader - Setting the equalizer (linear, voice, rock, classical, dance) ■...
RADIO mode RADIO mode Radio mode RDS (“Radio DataSsystem”) serves to transmit program identification and addi- tional services therefore also enabling automatic tracking of stations. Ð Main menu RADIO Settings in RADIO mode Press the button RADIO Press the button →...
RADIO mode Digital radio DAB If you do not want automatic station change (e.g. when driving through tunnels, when reception may be lost temporarily), you can deactivate this function ⇒ p age 9, Settings in RADIO mode. Ð DAB - Digital Audio Broadcasting is the digital transmission of radio programs based on the DAB, DAB+ or DMB standards.
MEDIA mode MEDIA mode Main menu MEDIA Function keys in the menu Settings Media - switches traffic programme on/off ■ Traffic program (TP) - switches on/off the track play function in the modes ■ Scan/mix/repeat inc. Main menu MEDIA - Overview ...
MEDIA mode - repeats the track currently being played ● If the CD has mechanical damage or is incorrectly or not fully inserted, the fol- ■ Repeat track lowing message “ appears in the display: CD”. Please check the CD and place it In “Repeat track”...
MEDIA mode ® External sources Connecting an external audio source via Bluetooth In Bluetooth audio mode, audio files can be played from an external audio source ® (e.g. a mobile phone) connected via Bluetooth External sources - Overview To activate this function it is necessary for the external audio source to be con- nected to the navigation system ⇒ ...
MEDIA mode Note ● The external audio source, which is connected via AUX-IN, can only be used if no unit is connected via MDI at the same time. ● If an external audio source is connected via AUX, which is equipped with an adapter for external power supply, it can occur that the audio signal is interrupted.
PHONE mode PHONE mode ® ® Connect mobile phone or Bluetooth device to Launch the search for Bluetooth audio accessories on the mobile phone. The search can take around 15 to 20 seconds. Once the search is complete, the naviga- navigation system tion system is displayed on the mobile phone as SKODA_BT.
Page 18
PHONE mode Function keys in the main menu TELEPHONE Telephone calls and functions during a call Press the button ■ PHONE Calls can be received even if the navigation system is switched off. ■ - Switches on voice operation, only with GSM II telephone preinstalla- ...
PHONE mode - opens a list of additional functions - loads the phonebook from the mobile phone to the memo- ■ ■ Extras Load telephone book ry of the radio navigation system. This procedure can take a few minutes. - switch between calls ■...
NAV mode (Navigation) NAV mode (Navigation) Overview WARNING (Continued) ● Traffic signs and traffic regulations always have priority over the driving Before using the radio navigation system recommendations provided by the navigation system. ● Route guidance is subject to constant changes, particularly to information Street and location names can be changed.
Page 21
NAV mode (Navigation) Manual copying Note If you insert the memory card with valid navigation data but the copy process ● All dtns. (country-, village-, road-, point of interest names) must be entered in- does notstart automatically, you can start it manually. cluding all country specific (or language-specific for points of interest) special characters.
Page 22
NAV mode (Navigation) Calling up additional information - switches on/off the use of motorways in the route calcu- ■ Avoid motorways lation Press the button - Information about the vehicle position and access to addi- tional functions (flagged destination, route list, route list, exclude a stretch) ■...
NAV mode (Navigation) - Deleting the destination memory or the list of the last - shows additional information about the destination (name of the des- ■ ■ Delete destination memory Details destinations. tination, country, city, etc.). The displayed information can be changed. ■...
NAV mode (Navigation) - stores in the destination memory Route guidance ■ Store - shows additional details about the destination ■ Details - stores in the destination memory ■ Store Starting route guidance ■ - starts route guidance Start Press the button followed by the function key - switches to the map Selecting a point of interest as a travel destination...
Page 25
NAV mode (Navigation) Setting options Note Turn the button - changes the scale. ● Making a diversion from a traffic jam based on TMC traffic reports may not al- ways offer a time advantage, e.g. if the diversion route is also congested. Press the button - repeat the last navigation announcement.
Page 26
NAV mode (Navigation) To remove the block of the stretch, press the button followed by the function Route ■ - remove the blocked stretch Lift cong. excl. Ð Stopping route guidance During route guidance, press the button (or touch the screen) followed by the function key - stop route guidance (stop).
TMC display TMC display Displaying TMC traffic reports TMC traffic reports are used to optimise the route during route guidance when there are traffic disruptions ⇒ p age 23, Dynamic route guidance with TMC use You can browse through all the traffic information received in the detailed display, in sequence by using the function keys.
Index Index Dynamic route guidance ..... . 23 Enter and save destination ....21 Anti-theft protection .
Page 29
Index Settings Basic system settings ......8 Media ........11 Mobile phone .
Page 30
ŠKODA pursues a policy of constant product and model development. We trust Reprinting, reproduction or translation, either in whole or in part, is not permitted that you will understand that changes to models in terms of shape, equipment without the written consent of ŠKODA. and engineering, may be introduced at any time.