Import Custom Destinations - Skoda Infotainment Columbus Operating Instructions Manual

›
The POI search is performed according to the category by pressing the func-
tion key .
B
or
›
the POI search is based on the destination name by pressing the function
key as well as by entering the name.
C
POI selection
Following the search, a list of found POIs will be displayed (the list is sorted by
the distance to the destination target).
›
Select the POI.
›
Press the function key Start.
If the destination entry occurs during route guidance, the destination change
must be confirmed by pressing the function key start in addition to confirming
in the following menu that appears.
The search areas menu for POIs
Search in immediate vicinity
D
Search near destination
E
Search near stopover
F
Along the route
G
Search near address
H
Within the area of the map point
I
In the option selection Near address and Select on map, the function key Edit
is displayed. The entered search area for the POIs can be edited by pressing
this function key.

Import custom destinations


Introduction
This chapter contains information on the following subjects:
Custom destination in vCard-format
Custom POI category
In this chapter, destinations are described which can be imported into the de-
vice memory.
Custom destinations can be created by means of the ŠKODA application
"MyDestination". For additional information, see the following ŠKODA Internet
pages.
» Fig. 45
http://infotainment.skoda-auto.com
Custom destination in vCard-format
In the device memory, a custom destination can be imported in the vCard for-
mat (*.vcf) from an SD card or a USB source.
Import
›
Insert the SD card into the device or connect a USB source with the file of
custom destination.
›
Press in the Navigation main menu the function key  → Import destina-
tions.
›
Select the source and confirm the import.
Route guidance
›
In the main menu Navigation press the function key
 → Destinations →
 →
.
›
Press the function key of the vCard to start the route guidance.
›
Press the function key Start.
If the menu setting for the alternative routes is turned on, the guidance for
this route type (economic / fast / short) must be selected before starting.
If the destination entry occurs during route guidance, the destination change
must be confirmed by pressing the function key start in addition to confirming
in the following menu that appears.
Delete
›
In the main menu Navigation press the function key
 → Destinations →
65
 →
66
.
›
Press the function key  in the line with the name of your stored custom des-
tination.
›
In the destination details, press the function key Edit → Delete.
›
Confirm the deletion.
65
Navigation