Phone Mode; Pairing Mobile Phone Or Bluetooth ® Device With Radio Navigation System; Main Menu Telephone - Skoda Amundsen+ Operating Instructions Manual

PHONE mode

Pairing mobile phone or Bluetooth
navigation system
To operate a mobile phone or other Bluetooth
system, a one-off connection of both devices is required.
Active connection
When the connection is active, the device search is launched from the radio navi-
gation system.
®
Enable Bluetooth on your mobile phone.
Press the button
PHONE → SETUP
■ Bluetooth settings - Settings for the Bluetooth
■ Search for devices - Search for external devices with an activated Bluetooth
function
The search can take around 15 to 20 seconds. When the process is complete, the
name of the Bluetooth devices is shown in the screen.
The mobile phone you want to connect can be selected directly by pressing the
function key with the name of the mobile phone or by turning the menu knob
and then pressing the button
Connect
Confirm the connection on the mobile phone. Depending on the type of mobile
phone, either an auto-generated 6-digit PIN code is displayed, which must be
confirmed according to the instructions on the screen of the mobile phone and
the radio navigation system, or a 4-digit PIN code displayed on the screen of the
radio navigation system must be entered manually.
If the entry was correct, the message appears in n the screen that the connection
was successful.
Passive connection
When the connection is passive, the device search is launched from the mobile
telephone.
®
Enable Bluetooth on your mobile phone.
Press the button
→
PHONE SETUP
®
device with radio
®
device from the radio navigation
.
®
- function
.
.
- Settings for the Bluetooth
■ Bluetooth settings
- Switch on visibility of the navigation system on other de-
■ Set Bluetooth visibility
vices with the Bluetooth
Launch the search for Bluetooth
search can take around 15 to 20 seconds. Once the search is complete, the radio
navigation system is displayed on the mobile phone as SKODA_BT.
Using the mobile phone to establish the connection. Depending on the type of
mobile phone, either an auto-generated 6-digit PIN code is displayed, which must
be confirmed according to the instructions on the screen of the mobile phone and
the radio navigation system, or a 4-digit PIN code displayed on the screen of the
radio navigation system must be entered manually.
If the entry was correct, the message appears in n the screen that the connection
was successful.
Deleting connected devices
A maximum of 4 mobile phones or Bluetooth
radio navigation system. To connect an additional device, a mobile phone or Blue-
®
®
tooth device must be deleted first.
Press the button
PHONE
- Settings for the Bluetooth
■ Bluetooth settings
- List of devices connected with the radio navigation system
■ Paired device list
- Delete the selected connected mobile phone or Bluetooth
■ Delete
15

Main menu TELEPHONE

Main menu TELEPHONE
Press the button
TELEPHONE
Individual functions in the menu TELEPHONE may depend on the equipment and
the properties of the connected mobile phone.
The mode can only be activated while the ignition is switched on.
PHONE
When switching on the radio navigation system, this automatically connects with
the mobile phone with which it was last connected. If it is not possible to connect
with this mobile phone, the system automatically attempts to establish the con-
nection to the next mobile phone which is in the list of the connected devices.
®
- function
®
function
®
audio accessories on the mobile phone. The
®
devices can be connected with the
.
→
SETUP
®
- function
.
®
device.
Ð

15
PHONE mode