Table of Contents
Advertisement
Configuration
(Standalone)
Color Wheel
Wave Effect
Wheel
Dimmer
Temperature
Page 12 of 18
Set the product in one of the standalone modes to control without a DMX controller.
·
Connect the product to a suitable power outlet.
Never connect a product that is operating in any standalone mode to a DMX string
connected to a DMX controller. Products in standalone mode may transmit DMX
signals that could interfere with the DMX signals from the controller.
To set the position or the rotation direction and speed of the color wheel on the Abyss
USB, follow the instructions below:
1.
Press <MENU> repeatedly until C-- shows on the display.
2.
Press <ENTER>.
3.
Use <UP> and <DOWN> to select one of the following:
·
C 1 (static white)
·
C 2 (static purple)
·
C 3 (static yellow)
·
C 4 (static blue)
·
C 5 (static green)
·
C 6 (static orange)
·
C L (left rotation)
or
·
C r (right rotation)
4.
Press <ENTER>.
5.
For C L or C r, use <UP> and <DOWN> to increase or decrease the rotation speed.
6.
Press <ENTER>.
To set the rotation direction and speed of the wave effect wheel on the Abyss USB, do the
following:
1.
Press <MENU> repeatedly until Wave shows on the display.
2.
Press <ENTER>.
3.
Use <UP> and <DOWN> to select one of the following:
·
Stop (no rotation)
·
W--L (left rotation)
or
·
W--r (right rotation)
4.
Press <ENTER>.
5.
For W--L or W--r, use <UP> and <DOWN> to increase or decrease the rotation
speed.
6.
Press <ENTER>.
To set the total output level of the Abyss USB, follow the instructions below:
1.
Press <MENU> repeatedly until U-- shows on the display.
2.
Press <ENTER>.
3.
Use <UP> and <DOWN> to increase or decrease the total output level.
4.
Press <ENTER>.
To view the product's current temperature, do the following:
1.
Press <MENU> repeatedly until teMP shows on the display.
2.
Press <ENTER>.
Abyss USB User Manual Rev. 1
Advertisement
Table of Contents
