Table of Contents Table of Contents 1. Before You Begin ....................1 What Is Included ......................... 1 Unpacking Instructions ......................1 Claims ............................1 Typographic Conventions ....................1 Icons ............................ 1 Safety Notes ........................2 Expected LED Lifespan ...................... 2 2.
Page 4
Table of Contents ARC2 + S ..........................20 HSV ............................20 5. Technical Information ..................21 Product Maintenance ......................21 Troubleshooting Guide ............Error! Bookmark not defined. Returns Procedure ......................22 Contact Us ................Error! Bookmark not defined. Technical Specifications ....................23 -ii- COLORado™...
If the box or contents (the product and included accessories) appear damaged from shipping, or show signs of mishandling, notify the carrier immediately upon receipt, not CHAUVET®. Failure to notify the carrier in a timely manner may invalidate your claim. In addition, keep the container and all the packing material for inspection.
There are no user-serviceable parts in this product. Any reference to servicing in this User Manual applies only to properly certified CHAUVET® technicians. Do not open the housing or attempt any repairs unless you are certified by CHAUVET®. Abide by all applicable local codes and regulations for proper installation of this product.
Introduction 2. Introduction Product The COLORado™ Batten 72 Tour is an RGBWA linear LED wash light. It consists of a single module that accommodates the internal power supply, the main control, the control Description panel, the LED drivers, the LED boards and lenses as well as the power and signal connectors.
Introduction Product Overview Control Panel 5-Pin DMX In/Out 3-Pin DMX In/Out Safety Eye Bolt Fuse Power Out Power In COLORado™ Batten 72 Tour User Manual Rev. 4...
The listed current rating indicates the maximum current draw during normal operation. For more information, download Sizing Circuit Breakers from the CHAUVET® website: www.chauvetpro.com. Never connect this product to a rheostat (variable resistor) or dimmer circuit, even if the rheostat or dimmer channel serves only as a 0% to 100% switch.
You must configure each slave product’s control panel to operate in SLAVE mode. During Master/Slave operation, the slave products will operate in unison with the master product. If you are not familiar with DMX, download the DMX Primer from the CHAUVET® website: www.chauvetpro.com.
Always mount this product in a safe position and make sure there is adequate room for ventilation, configuration, and maintenance. Rigging CHAUVET® recommends using the following general guidelines when mounting this product. · When selecting an installation location, consider easy access to this product for operation, programming adjustments, and routine maintenance.
Operation 4. Operation Control Panel Button Function Description <MENU> Exits from the current menu or function Enables the currently displayed menu or <ENTER> sets the currently selected value in to the current function Navigates upward through the menu list and <UP>...
Operation DMX Control In this mode, each product will respond to a unique starting address from the DMX controller. All products with the same starting address will respond in unison. 1. Set the running mode: a. Go to the RUN main level. b.
Operation Master/Slave The Master/Slave mode allows a group of COLORado™ Batten 72 Tours (the slave products) to simultaneously duplicate the output of another COLORado™ Batten 72 Tour (the master product) without a DMX controller. 1. Set each of the slave products: a.
· Green indicates that the upload process completed successfully. · Red indicates that the upload process failed due to an error. Recheck all cable connections and restart the process. If the issue persists, contact CHAUVET® Technical Support. DO NOT upload the data from a COLORado™ Batten 72 Tour to a different product.
Operation Whites Setting This setting allows you to select and edit the temperature of the white colors used in channel 7 (Macros) when in the TOUR mode and channel 13 when in the TR16 mode. You can also define the maximum RGB values when RGB to White (RGB to W) is active. 1.
Operation Menu Map Main Level Programming Levels Description RED : GREN: Combines red, green, blue, white and amber to BLUE: 000–255 make a custom color WHIT: STATIC AMBE: Selects the strobe frequency STRB: 00–20 (0–20 Hz) AUTO 10 automatic programs AUTO 01–10 CUSTOM...
Page 18
Operation Main Level Programming Levels Description PASSWORD Uploads custom programs to other COLORado™ UPLOAD …. Batten 72 Tour products (Enter Passcode) PASSWORD Defaults product to factory settings RESET …. (Enter Passcode) RGB set to 255 = max. output COLOR RGB TO W RGB set to 255 = balanced white Universal color balance No dimmer...
Operation DMX Values TOUR Channel Function Value Percent/Setting 000 ó 255 000~100% Master Dimmer 000 ó 255 000~100% 000 ó 255 000~100% Green 000 ó 255 000~100% Blue 000 ó 255 000~100% White 000 ó 255 000~100% Amber 000 ó 010 No Function 011 ó...
Operation TOUR Channel Function Value Percent/Setting (Cont.) 000 ó 040 No Function 041 ó 050 Auto 1 051 ó 060 Auto 2 061 ó 070 Auto 3 071 ó 080 Auto 4 081 ó 090 Auto 5 091 ó 100 Auto 6 101 ó...
Operation TR16 Channel Function Value Percent/Setting 000 ó 255 000~100% Dimmer 000 ó 255 000~100% Fine Dimmer 000 ó 255 000~100% 000 ó 255 000~100% Fine Red 000 ó 255 000~100% Green 000 ó 255 000~100% Fine Green 000 ó 255 000~100% Blue 000 ó...
Operation TR16 Channel Function Value Percent/Setting (Cont.) 000 ó 040 No function 041 ó 050 Auto 1 051 ó 060 Auto 2 061 ó 070 Auto 3 071 ó 080 Auto 4 081 ó 090 Auto 5 091 ó 100 Auto 6 101 ó...
Operation BLOCK1 Channel Function Value Percent/Setting 000 ó 255 000~100% Block 1 Red 000 ó 255 000~100% Block 1 Green 000 ó 255 000~100% Block 1 Blue 000 ó 255 000~100% Block 2 Red 000 ó 255 000~100% Block 2 Green 000 ó...
Operation ARC2 Channel Function Value Percent/Setting 000 ó 255 000~100% 000 ó 255 000~100% Green 000 ó 255 000~100% Blue 000 ó 255 000~100% White 000 ó 255 000~100% Amber ARC2 + D Channel Function Value Percent/Setting 000 ó 255 000~100% Master Dimmer 000 ó...
Technical Information 5. Technical Information Product To maintain optimum performance and minimize wear, you should clean this product frequently. Usage and environment are contributing factors in determining the cleaning Maintenance frequency. As a rule, clean this product at least twice a month. Dust build-up reduces light output performance and can cause overheating.
Be sure to pack the product properly. Any shipping damage resulting from inadequate packaging will be the customer’s responsibility. Proper FedEx packing or double-boxing are the packaging methods CHAUVET® recommends. CHAUVET® reserves the right to use its own discretion to repair or replace returned product(s). WORLD HEADQUARTERS - CHAUVET®...
Technical Information Technical Specifications Dimensions and Length Width Height Weight Weight 38.9 in (990 mm) 2.9 in (75 mm) 6.1 in (156 mm) 9.8 lbs (4.4 kg) Note: Dimensions in inches rounded to the nearest decimal digit. Electrical Power Supply Type Range Voltage Selection Switching (internal)