Installing The Server In A Rack; Input/Output Ports - IBM Xseries 345 8670 Maintenance Manual

The following illustrations show the locations of the input and output connectors on
your server.
Rear view
Serial
Video
Keyboard
Front view

Installing the server in a rack

Detailed cabling instructions for a typical rack server configuration are in the Rack
Installation Instructions that come with your server.

Input/output ports

This section provides information about the I/O ports on the rear of your server.
These ports include the following:
v One video port
v One keyboard port
v One auxiliary-device port (pointing device) port
v One dual channel Ultra320 SCSI controller (LVD) SCSI port
v One serial port
v Three Universal Serial Bus (USB) version 1.1 ports (USB 1 and USB 2 on the
v Two Ethernet ports
v Two RS-485 communication ports dedicated to the Integrated System
Mouse
Universal Serial Bus (USB)
RS 485-A
Ethernet 1
(ISMP)
RS 485-B
Ethernet 2
(ISMP)
USB 3
rear, USB 3 on the front)
Management Processor (ISMP)
1 and 2
SCSI
Chapter 4. Customer replaceable units
73