IBM Xseries 345 8670 Maintenance Manual page 26

Figure 3. "Create arrays" window
16
xSeries 345 Type 8670: Hardware Maintenance Manual and Troubleshooting Guide
4. From the list of ready drives, select the two drives you want to move to the
array.
5. Click (Add selected drives) to add the drives to the array.
6. Complete the following steps, if you want to configure a hot-spare drive:
a. Click the Spares tab.
b. Select the physical drive you want to designate as the hot-spare drive;
then, click (Add selected drives).
7. Click Next. The "Configuration summary" window opens.