Power Cords - IBM Xseries 345 8670 Maintenance Manual

Keyboard
Romanian
Russian
Serbian/Cyrillic
Slavic
Spanish
Swedish/Finnish
Swiss, French/German
Turkish
Turkish
UK English
Yugosl/Lat
US English-EMEA
Chinese/US
Thailand
French Canadian

Power cords

For your safety, IBM provides a power cord with a grounded attachment plug to use
with this IBM product. To avoid electrical shock, always use the power cord and
plug with a properly grounded outlet.
IBM power cords used in the United States and Canada are listed by Underwriter's
Laboratories (UL) and certified by the Canadian Standards Association (CSA).
For units intended to be operated at 115 volts: Use a UL-listed and CSA-certified
cord set consisting of a minimum 18 AWG, Type SVT or SJT, three-conductor cord,
a maximum of 15 feet in length and a parallel blade, grounding-type attachment
plug rated 15 amperes, 125 volts.
For units intended to be operated at 230 volts (U.S. use): Use a UL-listed and
CSA-certified cord set consisting of a minimum 18 AWG, Type SVT or SJT,
three-conductor cord, a maximum of 15 feet in length and a tandem blade,
grounding-type attachment plug rated 15 amperes, 250 volts.
For units intended to be operated at 230 volts (outside the U.S.): Use a cord set
with a grounding-type attachment plug. The cord set should have the appropriate
safety approvals for the country in which the equipment will be installed.
IBM power cords for a specific country or region are usually available only in that
country or region.
118
xSeries 345 Type 8670: Hardware Maintenance Manual and Troubleshooting Guide
IBM power cord part
number
13F9940
Used in these countries and regions
Argentina, Australia, China (PRC), New Zealand, Papua New
Guinea, Paraguay, Uruguay, Western Samoa
CRU No.
37L2572
37L2573
37L2574
37L2575
37L2576
37L2577
37L2578
37L2579
37L2580
37L2581
37L2582
37L2583
37L2585
37L2587
37L0913