IBM Xseries 345 8670 Maintenance Manual page 116

Note: See "System" on page 116 to determine which components should be replaced by a field service technician.
Error code/symptom
00180200
(No more I/O space available for PCI
adapter)
00180300
(No more memory (above 1MB for PCI
adapter))
00180400
(No more memory (below 1MB for PCI
adapter))
00180500
(PCI option ROM checksum error)
00180600
(PCI to PCI bridge error)
00180700, 00180800
(General PCI error)
00181000
(PCI error)
01295085
(ECC checking hardware test error)
01298001
(No update data for microprocessor 1)
01298002
(No update data for microprocessor 2)
01298101
(Bad update data for microprocessor 1)
01298102
(Bad update data for microprocessor 2)
I9990301
(Hard disk sector error)
I9990305
(Hard disk sector error, no operating
system installed)
106
xSeries 345 Type 8670: Hardware Maintenance Manual and Troubleshooting Guide
FRU/action
1. Run the Configuration/Setup Utility program.
2. Failing adapter.
3. System board.
1. Run the Configuration/Setup Utility program.
2. Failing adapter.
3. System board.
1. Run the Configuration/Setup Utility program.
2. Move the failing adapter to slot 1.
3. Failing adapter.
4. System board.
1. Remove failing PCI card.
2. System board.
1. Run the Configuration/Setup Utility program.
2. Move the failing adapter to slot 1.
3. Failing adapter.
4. System board
1. System board
2. PCI card
v Adapter
v System board
1. System board
2. Microprocessor
1. Ensure all processors have the same cache size.
2. Microprocessor 1.
1. Ensure all processors have the same cache sizes, dock speeds
and clock frequencies.
2. Microprocessor 2.
1. Ensure all processors have the same cache sizes, dock speeds
and clock frequencies.
2. Microprocessor 1.
1. Ensure all processors have the same cache sizes, dock speeds
and clock frequencies.
2. Microprocessor 2.
1. Hard disk drive
2. SCSI backplane
3. Cable
4. System board
v Install operating system to hard disk.