Default Settings - Oce OP1030 Operation Manual

Section 7 COPIER MANAGEMENT FUNCTIONS
Default setting
Changing the energy- Changes the energy-saving mode that will be entered
saving mode into when the [Energy Saver] key is pressed.
(See "5. Energy-saving modes" on page 4-11 for more
information.)
* This setting is displayed when the optional Printer Kit
7-40-2
Description
or Printer/Scanner Kit is installed.
If you are using a standard copier, or if the optional Fax
Kit is installed in your copier, you can press the
[Energy Saver] key to engage the Low power mode.
Available Factory
settings setting
Low power mode Low power
Sleep mode mode
Reference
page
7-58