Oce OP1030 Operation Manual page 186

Section 7 COPIER MANAGEMENT FUNCTIONS
● Custom paper type for 2-sided copying
Perform the following procedure to set whether or not each custom
type of paper (custom 1 - custom 8) will be available for use in 2-sided
copying.
1 Display the "Machine default" screen.
(See "(2) Accessing the machine default settings" on
page 7-41.)
Inch specifications
Default setting / Counter
Default setting
Copy
default
Machine Document
default Management
Metric specifications
Default setting / Counter
Default setting
Copy
default
Machine Document
default Management
2 Select "Select paper type (2sided)" in the settings list on the
left side of the touch panel and then touch the "Change #"
key.
The "Select paper type (2sided)" screen will be displayed.
Inch specifications
Default setting / Counter
Machine default
Default menu
Paper type (2nd drawer)
Paper type (3rd drawer)
Paper type (4th drawer)
Check bypass sizing
Select paper type (2sided)
Default setting
Metric specifications
Default setting / Counter
Machine default
Default menu
Paper type (2nd cassette)
Paper type (3rd cassette)
Paper type (4th cassette)
Check bypass sizing
Select paper type (2sided)
Default setting
7-46
Language Management
Bypass BOX
setting Management
Register Print
orig. size report
Language Management
Bypass Hard Disk
setting Management
Register Print
orig. size report
Setting mode
Plain
Plain
Plain
Off
Change #
Setting mode
Plain
Plain
Plain
Off
Change #
3 Select one of the "custom" paper type settings ("Custom 1"
through "Custom 8") under the "Default menu" column on the
left side of the touch panel and then touch the "Change #"
key.
Inch specifications
Select paper type(2sided)
Custom 1
Custom 2
Custom 3
Custom 4
Custom 5
Custom 6
Custom 7
Default setting - Machine default
End
Metric specifications
Counter
check
Select paper type(2sided)
User
Adjustment
Custom 1
Custom 2
Custom 3
Custom 4
Custom 5
Custom 6
Custom 7
Default setting - Machine default
End
4 Touch the "Off" key if you do NOT want that custom paper
Counter
check
type to be available for use in 2-sided copying.
User
Adjustment
Inch specifications
Custom 1
Default setting - Machine default - Select paper type (2sided)
Metric specifications
Close
Custom 1
Up
Down
Default setting - Machine default - Select paper type (2sided)
NOTE
Close
If you want to quit the displayed setting without changing it, touch the
Up
"Back" key. The touch panel will return to the screen in step 3.
Down
5 Touch the "Close" key. The touch panel will return to the
screen in step 3.
6 Touch the "Close" key. The touch panel will return to the
screen in step 2.
7 Touch the "Close" key. The touch panel will return to the
"Default setting"screen.
8
Touch the "End" key. The touch panel will return to the
contents of the "Basic" tab.
Select paper type(s) for duplex copy.
Default menu Setting mode
On
On
On
On
On
On
On
Select paper type(s) for duplex copy.
Default menu Setting mode
On
On
On
On
On
On
On
On
Off
On
Off
Close
Up
Down
Change #
Close
Up
Down
Change #
Back Close
Back Close