● Default operation mode
Perform the following procedure to set whether the display that
appears after power is turned on to the copier will be the one for the
copy operation mode or for the fax operation mode.
NOTE
This setting is only available when the optional Fax Kit is installed in
your copier.
1
Display the "Machine default" screen.
(See "(2) Accessing the machine default settings" on
page 7-41.)
Inch specifications
Default setting / Counter
Default setting
Copy
default
Machine
Document
default
Management
Metric specifications
Default setting / Counter
Default setting
Copy
default
Machine
Document
default
Management
2
Select "Select the main mode" ["Select main mode"] in the
settings list on the left side of the touch panel and then touch
the "Change #" key.
The "Select the main mode" ["Select main mode"] screen will
be displayed.
Inch specifications
Default setting / Counter
Machine default
Default menu
Sleep mode changing time
Low power mode chng. time
Select Copy output mode
Select FAX output mode
Select the main mode
Default setting
Metric specifications
Default setting / Counter
Machine default
Default menu
Sleep mode changing time
Low power mode chng. time
Select COPY output mode
Select FAX output mode
Select main mode
Default setting
Language
Management
Bypass
BOX
setting
Management
Register
Print
orig. size
report
Language
Management
Bypass
Hard Disk
setting
Management
Register
Print
orig. size
report
Setting mode
60 Minute
15 Minute
Inner tray
Inner tray
Change #
Copy mode
Setting mode
60 Minute
15 Minute
Inner tray
Inner tray
Change #
COPY Mode
Section 7 COPIER MANAGEMENT FUNCTIONS
3
Select the "Copy mode" key or the "FAX mode" key, as
appropriate.
Inch specifications
Select the main mode
Default setting - Machine default
Metric specifications
Select main mode
End
Default setting - Machine default
Counter
check
User
Adjustment
NOTE
If you want to quit the displayed setting without changing it, touch the
"Back" key. The touch panel will return to the screen in step 2.
End
4
Touch the "Close" key. The touch panel will return to the
screen in step 2.
Counter
check
User
Adjustment
5
Touch the "Close" key once again. The touch panel will return
to the "Default setting"screen.
6
Touch the "End" key. The touch panel will return to the
contents of the "Basic" tab.
Close
Up
Down
Close
Up
Down
Select the default display panel mode
when the power is on.
Copy mode
FAX mode
Select the default display panel mode
when the power is on.
COPY Mode
FAX mode
Back
Close
Back
Close
7-51