Oce OP1030 Operation Manual page 178

Hide thumbs Also See for OP1030:
Table of Contents

Advertisement

Section 7 COPIER MANAGEMENT FUNCTIONS
Default setting
Original set direction
Designates the default setting for the original set
direction.
Auto sleep time
Sets the amount of time that will elapse before the auto
sleep function engages.
* It is recommended that you try to set a longer time
* For more detailed information on the auto sleep
Auto low power time
Sets the amount of time that will elapse before the Low
Power mode is automatically activated if no operation is
performed on the copier during that time.
* For more detailed information on the Low power mode,
Copy eject location
Sets the location for the ejection of finished copies.
* This setting will only be displayed when the optional
* The available location for ejection will differ depending
Fax eject location
Sets the location for the ejection of received faxes.
* This setting will only be displayed when the optional
* The available location for ejection will differ depending
Default operation mode
Sets which operation mode, the copy operation mode or
the fax operation mode, will be selected when the power
is turned on to the copier.
7-40
Description
interval before the auto sleep function engages if you
use the copier frequently, and to a shorter time if there
are long intervals between use.
function, see page 4-11.
see page 4-11.
Document Finisher, Built-in Finisher or Job Separator
is installed on your copier.
upon the optional equipment that is installed on your
copier.
Fax Kit and Document Finisher (or the Built-in Finisher
or Job Separator) are installed on your copier.
upon the optional equipment that is installed on your
copier.
Available
Factory
settings
setting
Rear [Back Edge] /
Rear [Back
Left top corner
Edge]
1, 5, 15, 30, 45, 60,
60 (minutes)
90, 120, 180, 240
(minutes)
1, 5, 15, 30, 45, 60,
15 (minutes)
90, 120, 180, 240
(minutes)
Inner tray
Inner tray
Job separator
Finisher tray
Finisher main tray
Finisher sub tray
Inner tray
Inner tray
Job separator
Finisher tray
Finisher main tray
Finisher sub tray
Mailbox 1
Copy mode
Copy mode
FAX mode
Reference
page
7-46-2
7-47
7-48
7-49
7-50
7-51

Advertisement

Table of Contents
loading

This manual is also suitable for:

Op1040

Table of Contents