Making Booklets From Book Originals [Book To Booklet Mode] - Oce OP1030 Operation Manual

Section 5 OTHER CONVENIENT FUNCTIONS

11. Making booklets from book originals [Book to Booklet mode]

With this mode, you can add covers, and either copy onto them or not,
so that the finished copy sets will appear like a magazine, etc.
NOTES
• Only 8 " x 11", 11" x 8 ", 11" x 17", A5R, B5R, A4R, B4 and A3
1/2 1/2
size originals and 8 " x 11", 11" x 8
1/2
A4, B4 and A3 size copy paper can be used in this mode.
• It is possible for you to change the drawer[cassette] that will be used
to feed the cover sheets. (See "Cover drawer[cassette]" on page
7-71.)
Inch specifications
• If the optional Document Finisher with Center Bind & Fold Unit is
installed on your copier, you will be able to select center binding
(stapling) and folding. Only 8
can be center folded and stapled.
Metric specifications
• If the optional Document Finisher with Center Bind & Fold Unit is
installed on your copier, you will be able to select center binding
(stapling) and folding. Only A4R, B4 and A3 size copy paper can be
center folded and stapled.
A
B
5-26
", 11" x 17", B5R, B5, A4R,
1/2
" x 11" and 11" x 17" size copy paper
1/2
A
B
● With a cover
The original that will be used as the cover will be scanned first so that,
when the finished copies are folded, that page will act as the front and
back cover to the copy set.
A
2 5
B
● Without a cover
When the finished copies are folded, the front and back of the copy
set will be blank.
2
5
A B
1 Set the open-faced (book, etc.) original to be copied.
2 Touch the "Function" tab. The content of the "Function" tab
will be displayed.
A
2
5
B
2 5