Table of Contents
Advertisement
List of Functions
"Using the Mail Notification Function to Report Problems"
s
Sub-menu
Set to On to send an email to the preset addresses when a problem
Mail Notification
or warning occurs with a projector.
You can input the IP address
SMTP Server
projector.
You can enter a number from 0 to 255 in each field of the address.
However, the following IP addresses cannot be used.
127.x.x.x, 224.0.0.0 to 255.255.255.255 (where x is a number from
0 to 255)
You can input the port number for the SMTP server. The default
Port Number
value is 25. You can input numbers between 1 to 65535.
p.131
Function
g
for the SMTP server for the
Sub-menu
Address 1 Set
You can input the email address of the destination to send the
ting/Address 2
notification email to. You can register up to three destinations.
Setting/Address
You can enter up to 32 single-byte alphanumeric characters for
the email addresses.
3 Setting
The address for destination 1 is the mail notification sender's
address.
You can select the problems or warnings to be notified about by
email. When the selected problem or warning occurs in the
projector, an email is sent to the specified destination address
notifying that a problem or warning has occurred. You can select
multiple items from the displayed items.
90
Function
Advertisement
Table of Contents
