Table of Contents
Advertisement
List of Functions
Sub-menu
Encryption Key
You can enter the key used for WEP encryption. Enter the key in
1/Encryption Key
single-byte characters following instructions from the network
2/Encryption Key
administrator for the network in which the projector
participates. The type of character and the number that can be
3/Encryption Key
entered differ according to the WEP Encryption and Format
4
settings.
128Bit - ASCII: Single-byte alphanumerics, 13 characters.
64Bit - ASCII: Single-byte alphanumerics, 5 characters.
128Bit - HEX: 0 to 9 and A to F, 26 characters.
64Bit - HEX: 0 to 9 and A to F, 10 characters.
Set the WEP authentication type.
Authentication
Type
Open: Uses open system authentication.
Shared: Uses shared key authentication.
(This can only be set when WPA-PSK or WPA2-PSK are
Passphrase
selected from Security.)
You can enter a Pre-Shared Key (encrypted key) in single-byte
alphanumeric characters. Enter at least 8 and up to 32 characters.
Type of security
When the optional wireless LAN unit is installed and being used in
Advanced connection mode, it is strongly recommended that you set
security. Select one of the following security methods.
• WEP
Data is encrypted with a code key (WEP key). This mechanism prevents
communication unless the encryption keys for the access point and the
projector match.
Function
• WPA
This is an encryption standard that improves security which is a weak
point of WEP. Although there are multiple kinds of WPA encryption
methods, this projector uses TKIP and AES.
WPA also includes user authentication functions. WPA authentication
provides two methods: using an authentication server, or authenticating
between a computer and an access point without using a server. This
projector supports the latter method, without a server.
a
For setting details, follow the directions from the network
administrator of your network.
88
Advertisement
Table of Contents
