Connecting External Equipment - Epson EB-436Wi User Manual

Connecting Equipment

Connecting External Equipment

You can output images and audio by connecting an external monitor or speaker.
A
When outputting images to an external monitor
Connect the external monitor to the projector's Monitor Out port using the cable supplied with the external monitor.
B
When outputting audio to an external speaker
Connect the external speaker to the projector's Audio Out port using a commercially available audio cable.
a
• If you set Standby Mode to A/V Standby, you can output images or audio to an external device even if the projector is in standby mode. See the following for
more information.
s Extended - Standby Setup - Standby Mode
• Only analog RGB signals from the Computer1 port can be output to an external monitor. You cannot output signals input from other ports or component video
signals.
• Setting gauges for functions such as Keystone, Configuration menu, or Help screens are not output to the external monitor.
• When the audio cable jack is inserted into the Audio Out port, audio stops being output from the projector's built-in speakers and switches to external
output.
p.80
28