Table of Contents
Advertisement
Installing the Projector
• The projection screen is a rectangular shape without any distortion.
• The projector is tilted at an angle of no more than ±7˚ vertically and
±5˚ horizontally in relation to the projected screen.
a
When installing multiple projectors in the same room, set Distance of
Projectors according to the distance between the projectors.
s Extended - Easy Interactive Function - Distance of
p.80
Projectors
Attention
The interactive function operates by infrared communication. Note the
following points when installing.
• Make sure there is no strong light or sunlight shining on the Easy Interactive
Function receiver or the projection screen.
• If there is any dust stuck to the Easy Interactive Function receiver, it could
interfere with infrared communication and you may not be able to use the
function normally.
• Do not put paint or any stickers on the cover of the Easy Interactive
Function receiver.
• Install the projector so that the Easy Interactive Function receiver is not too
close to fluorescent lights.
21
Advertisement
Table of Contents
