Table of Contents
Advertisement
Projection Functions
a
• When User's Logo Protect from Password Protect is set to
On, a message is displayed and the User's Logo cannot be
changed. You can make changes after setting User's Logo
Protect to Off.
s "Managing Users (Password Protect)"
• If User's Logo is selected when Keystone, E-Zoom, Aspect, or
Adjust Zoom is being performed, the function currently being
performed is cancelled.
c
When the message "Choose this image as the User's Logo?" is
displayed, select Yes.
a
When you press the [
control panel, the screen size may change depending on the
signal to match the actual resolution of the image signal.
p.68
] button on the remote control or the
d
Move the box to select the part of the image to use as the User's
Logo.
You can perform the same operations from the projector's control
panel.
Remote control
a
You can save at 400x300 dots in size.
e
When you press the [
] button and the message "Select this
image?" is displayed, select Yes.
65
Advertisement
Table of Contents
