Error code
Request Error
This occurs when the device has a problem. The following table shows errors that can occur.
Code
EPTR_AUTOMATICAL
EPTR_COVER_OPEN
EPTR_CUTTER
EPTR_MECHANICAL
EPTR_REC_EMPTY
EPTR_UNRECOVERABLE
EX_BADPORT
EX_TIMEOUT
Response (Printing Result)
The format of response message is XML(text/xml).
To indicate that the server received the printing result, the Web server returns a response as follows:
HTTP/1.1 200 OK
Content-Type: text/xml; charset=utf-8
Content-Length: 0
50
Message
An automatically recoverable
error occurred.
The device has a problem.
The device has a problem.
The device has a problem.
There is no paper.
An unrecoverable error
occurred.
The port is invalid or the device is
not connected.
Timeout occurred.
Cause
Continuous printing of high-density
printing
The cover is open.
The cutter has a foreign matter.
Mechanical error, etc.
No paper
Low voltage
The registered information is
invalid.
The device power is off.
The device is not connected.
Other device control software
exists on the system.
The process was not completed
within a certain period of time.
A large amount of data was sent
with 1 method.